Hello,

we have an S4820T and a FX2 with 2 FN410T as IO-Modules. The 2 FN410T are running in default-mode wich means that each one of them has an own Port-Channel defined on the external ports.

I try now to connect the S4820T to the IOMs and therefore defined also 2 Port-Channels connected to the external ports of the IOMs. Sounds easy, isn't it.

My config for the 8 interfaces:

--------------------------------------------

interface TenGigabitEthernet 0/0

 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 45 mode active
 no shutdown
!
interface TenGigabitEthernet 0/1
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 44 mode active
 no shutdown
!
interface TenGigabitEthernet 0/2
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 45 mode active
 no shutdown
!
interface TenGigabitEthernet 0/3
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 44 mode active
 no shutdown
!
interface TenGigabitEthernet 0/4
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 45 mode active
 no shutdown
!
interface TenGigabitEthernet 0/5
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 44 mode active
 no shutdown
!
interface TenGigabitEthernet 0/6
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 45 mode active
 no shutdown
!
interface TenGigabitEthernet 0/7
 no ip address
 mtu 12000
!
 port-channel-protocol LACP
  port-channel 44 mode active
 no shutdown
!

--------------------------------------------

and for the Portchannels:

--------------------------------------------

interface Port-channel 44
 description "Port-Channel zu oberen FN410T"
 no ip address
 mtu 12000
 portmode hybrid
 switchport
 no shutdown
 link-bundle-monitor enable
!
interface Port-channel 45
 description "Port-Channel zu unteren FN410T"
 no ip address
 mtu 12000
 portmode hybrid
 switchport
 no shutdown
 link-bundle-monitor enable
!

--------------------------------------------

The IOMs have an  IP-address and when I try to ping it I get more "not reachable" then answers. So I think there is something wrong with the config. I guess you need more info? Feel free to ask.

Best regards

Hello,

I've created VLAN 100 and give it the ip 172.16.100.1 255.255.255.0. I assigned port 2/0/15 to VLAN 100. Connected a laptop to the port 2/0/15 and assigned the laptop an ip 72.16.100.100 255.255.255.0 172.16.100.1

I've enabled ip routing.

Now, the problem is there is no ping between the laptop and vlan 100, no ping between vlan 1 and 100.

 Show commands:

SWITCH#show vlan

VLAN Name Ports Type
----- --------------- ------------- --------------
1 default Po1-128, Default
Gi1/0/4-13,
Gi1/0/15,
Gi1/0/17-48,
Gi2/0/1-14,
Gi2/0/16-48,
Gi3/0/1-24,
Gi3/0/26,
Gi3/0/28,
Gi3/0/30-48
100 VLAN0100 Gi2/0/15 Static
4000 MGMT Static

SWITCH#show ip interface vlan 100

Routing Interface Status....................... Down
Primary IP Address............................. 172.16.100.1/255.255.255.0
Method......................................... Manual
Routing Mode................................... Enable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
MAC Address.................................... D067.E5B9.011D
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
Bandwidth...................................... 10000 kbps
Destination Unreachables....................... Enabled
ICMP Redirects................................. Enabled

SWITCH#show interfaces detail gigabitethernet 2/0/15

Port Name Duplex Speed Neg MTU Admin Link
State State
--------- --------------------------- ------ ------- ---- ----- ----- -----
Gi2/0/15 Full 1000 Auto 1518 Up Up

Port Description
-------- ----------------------------------------------------------------------
Gi2/0/15

Flow Control:Enabled
Port: Gi2/0/15
VLAN Membership mode:Access Mode

Operating parameters:
PVID: 100
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled

Port Gi2/0/15 is member in:

VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
100 VLAN0100 Untagged Static

Static configuration:
PVID: 100
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged

Port Gi2/0/15 is statically configured to:

VLAN Name Egress rule
---- --------------------------------- -----------
100 VLAN0100 Untagged

Forbidden VLANS:
VLAN Name
---- ---------------------------------

Port Gi2/0/15 Enabled
State: Discarding Role: Designated
Port id: 128.71 Port Cost: 20000
Port Fast: Yes (Configured: yes) Root Protection: No
Designated bridge Priority: 32768 Address: D067.E5B9.011B
Designated port id: 128.71 Designated path cost: 0
CST Regional Root: 80:00:D0:67:E5:B9:01:1B CST Port Cost: 0
BPDU: sent 1552, received 0

SWITCH#show ip interface

Default Gateway................................ 0.0.0.0
L3 MAC Address................................. D067.E5B9.011D

Routing Interfaces:

Interface State IP Address IP Mask Method
---------- ----- --------------- --------------- -------
Vl1 Up 172.16.0.2 255.255.255.0 Manual
Vl100 Down 172.16.100.1 255.255.255.0 Manual

Any Ideas? 

Thank you!

I need to configure   LACP for connect  KEMP Load Master.

So how can i  configure the LACP on Dell  N4064F (switch)

Please advice me

Thanks

Hi,

another issue with my S4820T. I have also 2 Netscreen SSG5 in a HA-Cluster for Failover and want to connect them to my S4820T. I get a Link-Light but no traffic at all. Are there any specialities to configure these 2 ports?

Thx

6 x N2048P stacked.

See "Details" on the switch in network manager.

Click "Network"

The "Ports" window only shows as far as the Gi5/0/16 port. That is 208 ports displayed.

The "Network Details" - "VLAN(s) by Port" has the last gigabit port as Gi6/0/48 - and after that all the 10GB ports (Te1/0/1 - Te6/0/2).

In other words - Gi5/0/17 - Gi6/0/48 and all the Te ports are missing in the "Ports" window.

Hi, I am looking to configure specific test monitors via SNMP for S4048-ON devices.  Can you please help me find the exact MIB file needed for this?  I have seen from other forum posts that all Dell MIBs can be downloaded from,

ftp://ftp.us.dell.com/sysman/

However, I am having a hard time finding, which file I need.

Thanks,

NICK

Hi,

I have several DELL-equipement and especially for here I'm asking about a S4820T and 2 FN410T in a FX2. I want all have a management-IP defined on the Management-Interface. Especially for the 2 FN410T I want to use the Management-Interface because onla than I can see it in the CMC of the FX2.

But for this I Need a Management-VLAN because only than the MAC-address of the Management-VLAN won't flap from the CMC Port to the FN410T external ports and back.

So, how can I define a Manegement-VLAN without loosing the connecion? I'm might missing only a very small Thing but I'm stuck. As far as I know I cannot define a VLAN for the Management-IP of the FN410T. So do I have to move all other traffic in another VLAN? And how can I connect to the management-IP if it is in another VLAN?

Thx in advance

Hello,

I have a FX2 with 2 FN410T currenty running in Default standalone mode. So I connected them with Portchannels to the uplink-Switch.

Now I got the recommendation to run in VLT-mode. I try to understand it. As far as I understand I Need to connect the 2 FN410T over Ports 9 for the VLT internal traffic. And than I read something about a heartbeat/backup link. This should be defined over the management-IPs. But the management-IPs are defined on the VLAN-Interface in my case. Can I use this anyway? And d I Need to use another pair of ports for this?

All guides only define Portchannels eith the 4 Ports 10 and 11 of the 2 FNs. Why? Than I use a lot of bandwith comparing with the Default mode?

Thy in advance

Hi all,

I am having an issue with failover in my Dell N3048 stack.

This is what is currently happening:

1. 2 In a stack
2. Management Role sits with unit 2, unplug the power from unit 2, whilst starting an open ping to the gateway and an external ip.  Don't lose packets in either ping
3. Plug the switch back in, remains unassigned for a while then eventually comes back as a stack member.  At this point pings to the gateway and external IP completely drop.  Internal routing is still working as i can ping SVI's and SSH onto the switch
4. OSPF seems to have stopped for some reason and doesn't remain active, show ip ospf "OSPF is not initialized. Please check if routing is enabled."
5. The only way to get it back is to no ip routing / ip routing or reboot the switches.

Any idea why this is, I was hoping for a much more seamless fail-over and fail back. This is definitely not ideal!

Happy to provide any details that are required.

Cheers

I'm going to setup n.4 DELL N1548 switches; they are linked throught uplink ports (10GB) as you can see in the image attached. There are n.3 servers; each server has n.2 NICs mounted using bonding mode 6 (balance-alb  - Adaptive Load Balancing ) linked to 2 different switch.

Could you give me some advices on how to configure a redundant scenario with those switches ? STP, LACP, routing, etc

Hello,

I'm a bit confused with VLANs. Sorry about that.

I have a FX2 with 3 FC630 running ESXi and 2 FN410T as IOM. Uplink is a S4820T.

On the S4820T I use VLAN 1 as in the FN410T all ports are in this VLAN untagged. For iSCSI i use other VLANs.

My question what I don't understand is now the Management VLAN. Can I use a VLAN wich is not the Default-VLAN for the Management-Interfaces and can I mix Tagged and Untagged ports? This is necessary in my opinion because I want to use the same port of the router. This would than mean that the router has the default-VLAN for user-traffic and another VLAN for management. But the Management-Interface cannot bound to a VLAN. Now I'm stuck.

Thx in advance

Hello Friends!

My name is Sofia Daniel. I am from Queens Village, USA and studying DELL DCPPE-200 Certification exam. I want to attempt this exam after two month. If any student or professional expert who have information about this Dell certification exam kindly recommend me DCPPE-200 Study material for my exam. i am still preparing my exam with DCPPE-200 Question Answer which one i get from Passin1day.com . 

If you have any information about where i get the best Dell PowerEdge Professional Exam study material kindly share your review ASAP.

Regard: 

Sofia Daniel

Hi,

I am trying to set up VLT domain which will connect downstream to several N-series Switches and upstream to Cisco Router and I am experiencing unusual behavior.

S4048-ON are running 9.10(0.1) software

So VLT itself work but OSPF adjacency with Cisco router will not form when 2 VLT peers are up. As soon as I power off the second peer the ospf adjacency is forming instantly.

Also when 2 peers are alive one of them is very unresponsive (drops packets, and if not the latency is around 500ms), again, when I power off one peer device (doesn't matter which one) everything works just fine.

Is there something wrong in my config or is it a software bug ?

PS Edge switches are connected to Te1/1 - 1/3. Router is connected to Te1/45 and VLTi is configured on Te1/47 and Te1/48... on both VLT peers

Configs for reference:

1st VLT peer:

T1-CSW#sh run
Current Configuration ...
! Version 9.10(0.1)
!
boot system stack-unit 1 primary system: A:
boot system stack-unit 1 secondary system: B:
boot system stack-unit 1 default system: A:
!
hostname T1-CSW
!
protocol lldp
!
redundancy auto-synchronize full
!
[edit]
lacp system-priority 1
!
protocol spanning-tree rstp
no disable
bridge-priority 0
!
!
vlt domain 100
peer-link port-channel 100
back-up destination 10.10.254.2
primary-priority 10
!
stack-unit 1 provision S4048-ON
!
interface TenGigabitEthernet 1/1
no ip address
!
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
!
port-channel-protocol LACP
port-channel 2 mode active
no shutdown
!
interface TenGigabitEthernet 1/3
no ip address
!
port-channel-protocol LACP
port-channel 3 mode active
no shutdown
!
[edit]
!
interface TenGigabitEthernet 1/45
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/46
no ip address
shutdown
!
interface TenGigabitEthernet 1/47
no ip address
no shutdown
!
interface TenGigabitEthernet 1/48
no ip address
no shutdown
!
[edit]
!
interface Port-channel 1
no ip address
switchport
vlt-peer-lag port-channel 1
no shutdown
!
interface Port-channel 2
no ip address
switchport
vlt-peer-lag port-channel 2
no shutdown
!
interface Port-channel 3
no ip address
switchport
vlt-peer-lag port-channel 3
no shutdown
!
interface Port-channel 100
no ip address
channel-member TenGigabitEthernet 1/47-1/48
no shutdown
!
interface Vlan 1
!untagged Port-channel 100
!
interface Vlan 2
ip address 192.0.0.1/16
tagged Port-channel 1-3
no shutdown
!
interface Vlan 3
ip address 172.0.0.1/16
tagged Port-channel 1-3
no shutdown
!
interface Vlan 4
ip address 10.0.1.1/24
tagged Port-channel 1
no shutdown
!
interface Vlan 5
no ip address
tagged Port-channel 1
no shutdown
!
interface Vlan 8
ip address 10.10.8.1/23
tagged TenGigabitEthernet 1/17
tagged Port-channel 1-3
no shutdown
!
interface Vlan 40
ip address 10.10.40.1/22
tagged Port-channel 1-3
no shutdown
!
interface Vlan 98
ip address 10.10.90.2/24
no shutdown
!
interface Vlan 240
ip address 10.10.240.1/22
tagged Port-channel 1-3
no shutdown
!
interface Vlan 997
no ip address
tagged Port-channel 1-3
no shutdown
!
interface Vlan 999
ip address 10.255.10.10/24
tagged TenGigabitEthernet 1/45
tagged Port-channel 45
no shutdown
!
interface Vlan 1001
ip address 10.10.254.1/24
no shutdown
!
router ospf 1
router-id 10.255.10.10
network 10.10.8.0/23 area 0
network 10.255.10.0/24 area 0
passive-interface default
no passive-interface Vlan 999
!
[edit]
!
end

-----------------------------------------------------------

2nd VLT Peer:

T2-CSW#sh run
Current Configuration ...
! Version 9.10(0.1)
!
boot system stack-unit 1 primary system: A:
boot system stack-unit 1 secondary system: B:
boot system stack-unit 1 default system: A:
!
logging monitor informational
!
hostname T2-CSW
!
protocol lldp
!
redundancy auto-synchronize full
!
[edit]
lacp system-priority 1
!
protocol spanning-tree rstp
no disable
bridge-priority 4096
!
vlt domain 100
peer-link port-channel 100
back-up destination 10.10.254.1
primary-priority 20
!
stack-unit 1 provision S4048-ON
!
interface TenGigabitEthernet 1/1
no ip address
!
port-channel-protocol LACP
port-channel 1 mode active
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
!
port-channel-protocol LACP
port-channel 2 mode active
no shutdown
!
interface TenGigabitEthernet 1/3
no ip address
!
port-channel-protocol LACP
port-channel 3 mode active
no shutdown
!
[edit]
!
interface TenGigabitEthernet 1/45
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/46
no ip address
no shutdown
!
interface TenGigabitEthernet 1/47
no ip address
no shutdown
!
interface TenGigabitEthernet 1/48
no ip address
no shutdown
!
[edit]
!
interface Port-channel 1
no ip address
switchport
vlt-peer-lag port-channel 1
no shutdown
!
interface Port-channel 2
no ip address
switchport
vlt-peer-lag port-channel 2
no shutdown
!
interface Port-channel 3
no ip address
switchport
vlt-peer-lag port-channel 3
no shutdown
!
interface Port-channel 10
no ip address
no shutdown
!
interface Port-channel 100
no ip address
channel-member TenGigabitEthernet 1/47-1/48
no shutdown
!
interface Vlan 1
!untagged Port-channel 100
!
interface Vlan 2
ip address 192.0.0.2/16
tagged Port-channel 1-3
no shutdown
!
interface Vlan 3
ip address 172.0.0.2/16
tagged Port-channel 1-3
no shutdown
!
interface Vlan 4
ip address 10.0.1.2/24
tagged Port-channel 1
no shutdown
!
interface Vlan 5
no ip address
tagged Port-channel 1
no shutdown
!
interface Vlan 8
ip address 10.10.8.2/23
tagged TenGigabitEthernet 1/17
tagged Port-channel 1-3
no shutdown
!
interface Vlan 40
ip address 10.10.40.2/22
tagged Port-channel 1-3
no shutdown
!
interface Vlan 98
ip address 10.10.90.1/24
no shutdown
!
interface Vlan 240
ip address 10.10.240.2/22
tagged Port-channel 1-3
no shutdown
!
interface Vlan 997
no ip address
tagged TenGigabitEthernet 1/45
tagged Port-channel 1-3
no shutdown
!
interface Vlan 999
ip address 10.255.10.11/24
tagged TenGigabitEthernet 1/45
no shutdown
!
interface Vlan 1001
ip address 10.10.254.2/24
no shutdown
!
router ospf 1
router-id 10.255.10.11
network 10.10.8.0/23 area 0
network 10.255.10.0/24 area 0
passive-interface default
no passive-interface Vlan 999
!
ip ssh server enable
ip ssh server version 2
!
line console 0
logging synchronous level 2 limit 20
line vty 0
line vty 1
line vty 2
line vty 3
line vty 4
line vty 5
line vty 6
line vty 7
line vty 8
line vty 9
!
reload-type
boot-type normal-reload
config-scr-download enable
!
end
T2-CSW#

--------------------------------------------------------------

Cisco Router:

Router#sh run
Building configuration...

Current configuration : 2042 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef
!
voice-card 0
no dspfarm
!
bridge irb
!
!
!
interface Loopback0
ip address 8.8.8.8 255.255.255.255
!
interface GigabitEthernet0/0
mtu 1500
no ip address
duplex auto
speed auto
media-type rj45
negotiation auto
!
interface GigabitEthernet0/0.999
encapsulation dot1Q 999
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
!
interface GigabitEthernet0/1
mtu 1500
no ip address
duplex auto
speed auto
media-type rj45
negotiation auto
!
interface GigabitEthernet0/1.999
encapsulation dot1Q 999
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
!
interface BVI255
ip address 10.255.10.2 255.255.255.0
ip ospf 1 area 0
!
router ospf 1
router-id 10.255.10.2
log-adjacency-changes
redistribute connected subnets
network 10.0.0.0 0.0.0.255 area 0
!
ip classless
!
[edit]
!
control-plane
!
bridge 253 route ip
bridge 255 route ip
!
[edit]
!
end

I need some help on troubleshooting a couple flapping ports. I have had this happen with a computer and also a phone that had a printer plugged into it.

<190> Aug 16 13:24:27 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699526 %% [CLI:it1admin:10.11.5.48] User it1admin logged in to enable mode.
<190> Aug 16 13:24:22 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699525 %% [CLI:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 13:11:50 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669952                                                                                                                                                             3 %% Email Send Failed!No of Email sends Failed So far= 22009
<190> Aug 16 12:53:22 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699522 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 12:46:03 Back Office network-1 SIM[emWeb]: usmdb_util.c(5772) 66995                                                                                                                                                             20 %% System time is changed from 12:46:3 8/16/2017 to 12:46:3 8/16/2017
<190> Aug 16 12:46:03 Back Office network-1 SIM[emWeb]: usmdb_util.c(5772) 66995                                                                                                                                                             19 %% System time is changed from 12:46:3 8/16/2017 to 12:46:3 8/16/2017
<190> Aug 16 12:46:03 Back Office network-1 SIM[emWeb]: usmdb_util.c(5772) 66995                                                                                                                                                             18 %% System time is changed from 12:46:3 8/16/2017 to 12:46:3 8/16/2017
<190> Aug 16 12:46:06 Back Office network-1 SIM[emWeb]: usmdb_util.c(5772) 66995                                                                                                                                                             17 %% System time is changed from 12:46:6 8/16/2017 to 12:46:3 8/16/2017
<189> Aug 16 12:41:30 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669951                                                                                                                                                             6 %% Email Send Failed!No of Email sends Failed So far= 22008
<190> Aug 16 12:40:08 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699515 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 12:37:32 Back Office network-1 CLI_WEB[UtilTask]: cmd_logger_api.c(                                                                                                                                                             260) 6699514 %% [CLI:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 12:31:51 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699513 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 12:28:33 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699512 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 12:27:04 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699511 %% [CLI:it1admin:10.11.5.48] User it1admin logged in to enable mode.
<190> Aug 16 12:27:01 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699510 %% [CLI:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 12:11:24 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669950                                                                                                                                                             9 %% Email Send Failed!No of Email sends Failed So far= 22007
<189> Aug 16 11:41:19 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669950                                                                                                                                                             8 %% Email Send Failed!No of Email sends Failed So far= 22006
<190> Aug 16 11:12:31 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699507 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<189> Aug 16 11:11:13 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669950                                                                                                                                                             6 %% Email Send Failed!No of Email sends Failed So far= 22005
<190> Aug 16 11:06:55 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699505 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 11:06:33 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699504 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<184> Aug 16 11:03:30 Back Office network-1 CLI_WEB[emWeb]: fpobj_baselogemailAl                                                                                                                                                             ertCfg.c(549) 6699503 %% test
<190> Aug 16 11:02:42 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699502 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 10:41:08 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669950                                                                                                                                                             1 %% Email Send Failed!No of Email sends Failed So far= 22004
<189> Aug 16 10:11:01 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669950                                                                                                                                                             0 %% Email Send Failed!No of Email sends Failed So far= 22003
<190> Aug 16 09:52:01 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699499 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 09:48:52 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699498 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 09:40:56 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669949                                                                                                                                                             7 %% Email Send Failed!No of Email sends Failed So far= 22002
<189> Aug 16 09:32:21 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699496 %% Gi1/0/2 is transitioned from the Learning state to the Forwarding stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:18 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699495 %% Gi1/0/2 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:18 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699494 %% Link Up: Gi1/0/2
<189> Aug 16 09:32:15 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699493 %% Gi1/0/2 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:15 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699492 %% Link on Gi1/0/2 is failed
<189> Aug 16 09:32:15 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699491 %% Link Down: Gi1/0/2
<189> Aug 16 09:32:14 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699490 %% Gi1/0/2 is transitioned from the Learning state to the Forwarding stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:11 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699489 %% Gi1/0/2 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:11 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699488 %% Link Up: Gi1/0/2
<189> Aug 16 09:32:03 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699487 %% Gi1/0/2 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 09:32:03 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699486 %% Link on Gi1/0/2 is failed
<189> Aug 16 09:32:03 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699485 %% Link Down: Gi1/0/2
<189> Aug 16 09:10:50 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669948                                                                                                                                                             4 %% Email Send Failed!No of Email sends Failed So far= 22001
<190> Aug 16 08:42:44 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699483 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<189> Aug 16 08:40:45 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669948                                                                                                                                                             2 %% Email Send Failed!No of Email sends Failed So far= 22000
<190> Aug 16 08:38:01 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699481 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 08:31:00 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699480 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 08:27:51 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699479 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 08:17:14 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699478 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 08:13:10 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699477 %% [CLI:it1admin:10.11.5.48] User it1admin logged in to enable mode.
<189> Aug 16 08:12:59 Back Office network-1 TRAPMGR[emWeb]: traputil.c(777) 6699                                                                                                                                                             476 %% Failed User Login with User ID: it1admin
<190> Aug 16 08:12:59 Back Office network-1 USER_MGR[emWeb]: user_mgr.c(1793) 66                                                                                                                                                             99475 %% User it1admin Failed to login because of authentication failures
<190> Aug 16 08:12:46 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699474 %% [CLI:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 08:10:39 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669947                                                                                                                                                             3 %% Email Send Failed!No of Email sends Failed So far= 21999
<190> Aug 16 08:09:01 Back Office network-1 VOIP[emWeb]: voip_api.c(139) 6699472                                                                                                                                                              %% Interface [ifName not found(0)] not configurable.
<190> Aug 16 08:09:01 Back Office network-1 VOIP[emWeb]: voip_api.c(139) 6699471                                                                                                                                                              %% Interface [ifName not found(0)] not configurable.
<190> Aug 16 08:08:53 Back Office network-1 VOIP[emWeb]: voip_api.c(139) 6699470                                                                                                                                                              %% Interface [ifName not found(0)] not configurable.
<190> Aug 16 08:08:53 Back Office network-1 VOIP[emWeb]: voip_api.c(139) 6699469                                                                                                                                                              %% Interface [ifName not found(0)] not configurable.
<190> Aug 16 08:00:41 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699468 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 08:00:27 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699467 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 07:57:24 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699466 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<190> Aug 16 07:56:53 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699465 %% [WEB:it1admin:10.11.5.48] Disconnected due to Idle Timeout
<190> Aug 16 07:53:41 Back Office network-1 CLI_WEB[emWeb]: cmd_logger_api.c(260                                                                                                                                                             ) 6699464 %% [WEB:it1admin:10.11.5.48] User has succesfully logged in
<189> Aug 16 07:40:34 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669946                                                                                                                                                             3 %% Email Send Failed!No of Email sends Failed So far= 21998
<189> Aug 16 07:12:17 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699462 %% Gi1/0/7 is transitioned from the Learning state to the Forwarding stat                                                                                                                                                             e in instance 0
<189> Aug 16 07:12:14 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699461 %% Gi1/0/7 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 07:12:14 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699460 %% Link Up: Gi1/0/7
<189> Aug 16 07:12:02 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699459 %% Gi1/0/7 is transitioned from the Forwarding state to the Blocking stat                                                                                                                                                             e in instance 0
<189> Aug 16 07:12:02 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699458 %% Link on Gi1/0/7 is failed
<189> Aug 16 07:12:02 Back Office network-1 TRAPMGR[trapTask]: traputil.c(735) 6                                                                                                                                                             699457 %% Link Down: Gi1/0/7
<189> Aug 16 07:10:27 Back Office network-1 TRAPMGR[LOG]: traputil.c(777) 669945                                                                                                                                                             6 %%

Hey all,

When trying to update the firmware on a PowerConnect 6248, I've been trying to use the following method:

System > File Management > File Download > HTTP

After browsing to the .stk file, and clicking "Apply Changes", the upload starts and seems to complete without any issues. After navigating to "Active Images" to attempt to apply the image file, it's just not listed - only the current version is available.

Is this expected behavior? Am I perhaps missing something?

Any assistance would be much appreciated, thanks

I have a number of n2048p and am having the same issue so it's clearly something I'm doing/not doing.

I have 2 laptop's connected to a switch and running constant pings between them. I create the vlan, give the vlan int an IP address and add the switch ports to the access vlan. I can now also ping the vlan interface from both laptops. 

So far so good.

I now set the uplinks as trunk interfaces and everything stops working. The laptops can't ping each other or the vlan int.

Reset the uplinks back to access ports and it all works again.

Good moring,

we have couple of switches 1052P with some Polycom phones connected using the POE ports working fine, 2 days ago one of them lost the POE, all ports went to no POE without any warning, we have be checking settings and compare with others and no change were detected. Does any have the similar problem ?

we fix by rebooting, but this happen today again.

the power firmware version is 3.0.0.82

Hello,

I have a S4820T and want to activate iSCSI optimisation. I enabled iSCSI, and a "sh iscsi" gives the following:

iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port    Target IP Address
3260
860

but if I try a "sh iscsi session" I get:

% Error: iSCSI session monitoring is not enabled

An looked for a while but cannot find how I enable the monitoring. Any hint is appreciated.Thx,

Willi

I'm using SolarWinds NPM to monitor my host of switches, including several PC 6248s.  I'm trying to get the topology working, but I'm not getting anything from most of these switches.  I have them all on 3.3.16.1, but SW support is saying they don't have the proper OIDs for topology.  How can I confirm/update the MIBs on the switches to get this working?

Is this an SNMP/LLDP issue?  I have other Dell switches (N2048) that popped up in the topology as soon as I installed them, with basically the same configuration.

Storage admin reports connectivity loss, and I see lots of these errors on my MXL switch:

 %STKUNIT0-M:CP %iSCSI-5-ISCSI_OPT_NEW_TCP_CONNECTION: New iSCSI TCP Connection is discovered: source ip-address : xxxx  source port: 55717 destination ip-address: xxxxx destination port: 3260

Anyone seen this and what could be causing it?

I have MXL-10/40GbE on FTOS 9.11(0.0P9) and Dell PS6210. Thanks!