2x 6024 interconnected with lacp; both connected with one port using lacp to...
Hi Guys.I have 2x 6024 using lacp's interconnected.A server with 2 nics with an lacp bond both connected to the same port-channel ID on one of the switches works, and I assume it should even when it's...
View ArticleMXL switch and M620 connectivity issues
Hi all,I'm fairly new to blade chassis/networking and have been tasked with setting up a M1000e with 12 blades with 4 mxl fabric switches splitting 4 VLANs across 2 VLT pairs (management &...
View ArticlePortmodes on DNOS 9
Hello,I'm looking at a S4048-ON switch and I'm wondering portmodes (aka Switchport mode) options DNOS 9 offer. I can see there is hyrbid but that needs to be set? If so, what mode is it in prior to...
View ArticleN2048 stack randomly fails to reply to SNMP requests (6.3.0.6)
Hello,Today, we have observed that some Dell N2048 stacks (running 6.3.0.6) fail to respond to SNMP requests. I haven't checked the logs of all of them but one device at least had this kind of log...
View ArticleRJ45 LEDs on PowerConnect 6224
I'm troubleshooting some user complaints of slow network response, and I'm looking at the link status lights for my PC RJ45 connections on the 6224. All of the right LED's (above the RJ45 jacks) are...
View ArticleDell N-Series Stacking Cables
I have spent the better part of a day trying to find all of the part numbers for stacking cables for the N-Series switches. I am specifically looking to stack two N3048P switches and I need a 2 meter...
View ArticleMXL switch - When is tunneling useful?
I am deploying a new stack of MXLs in a new M1000e next week and I've been looking through the manual. I noticed a section entitled "Tunneling." For explanation all that is given is the...
View ArticleDell S4810 switch as a default gateway
Hello,I have two Dell S4810 switches bonded with 40G for redundancy and i have 3 clients directly plugged into the switches also bonded. All of the clients are on the same 192.168.1 network. I have a...
View ArticleDell PowerConnect 2724 Managed Mode not working?
I recently acquired a dell powerconnect 2724 from a friend, and I cant seem to find the web interface. I tried the default IP addresses, and I looked on an app for listing all the IP addresses on the...
View ArticleConnecting device to VLAN A causes devices in VLAN B to lose connectivity.
Hello,I'm trying to resolve an issue in a two-device stack of PowerConnect 6248s (firmware 3.3.3.3) that has me baffled.Here are what I feel are the relevant configuration items:- "ip routing" enabled...
View ArticleConfigure Force 10MXL with I/O module 4-port 10Base-T
hy All, please helpmeI have Blade M1000e with configuration as follow;Server 4 unitforce 10 MXL 2 unit (included each 4-port 10Base-T)i want to configure as follow;one force 10 MXL for use internal IP...
View Articletrouble applying access-list
Hi, I have a S3048 running Dell IOS firmware 9.10. I would like to restrict access for telnet and ssh to the switch but i'm having trouble getting this to work. So what i have is:ip access-list...
View ArticleHow do you turn off PowerConnect 7048 fan speed warnings?
We get messages like this all the time.<189> AUG 29 09:56:24 192.168.0.254-1 BSP[90164720]: cpu_env_monitor.c(206) 4326 %% Temperature Status Change, current = 2, previous = 1 FanSpeed set to:...
View ArticleFORCE10 MXL FCOE configuration issue
Hi all i am facing an issue while configuring force10 mxl as fcoe switchhere is the scenarioi have M830 blade server installed in M1000E blade chassis having 57810 dual port 10 bg CNA hba on b slot.i...
View ArticleDOUBT ABOUT VLAN ON POWERCONNECT 2848
Hi friends,I work with IT and my expertise is Linux. Now, I'm setting a Captive Portal in my work with AP (Motorola AP-5131) that has a unique physical ethernet port, but is it possible to create 2...
View ArticleDell N4000 - soc_xgs3_mem_dma: FP_TCAM.ipipe0 failed(NAK)
Dear Siranyone knows about this error message?"broad_hpc_drv.c(4429) 8705 %% _soc_xgs3_mem_dma: FP_TCAM.ipipe0 failed(NAK)" I got N4032 x 1 and N4032F x 1 stacking togetheruse firmware version...
View ArticleSSH unreachable and CONSOLE password lost on a PowerConnect M6348
Hey everyone,I'm in serious trouble...The switch doesn't respond to ping (even after hard reboot), and I have lost the console password...I am looking for a way to get out of this mess, and be able to...
View ArticlePC 2848: Will it work with a GLC-FE-100LX?
Anyone know? It seems like most of the newer Cisco switches do not like these SFP modules and we had some spare 2848 switches. The modules are in use with switches that need replacement (well out of...
View ArticleProblem settings up VLANs on PowerConnect 2724
I am having issues getting VLAN's setup on my PC 2724. I have 2 switches, a 5324 that connects to most of my servers and a 2724 for core networking (routers, backup NAS, cablecard tuners, wireless,...
View ArticlePC 6224 is killing my network. Help? :)
Howdy,I have a PowerConnect 6224 that I'm using at home on my home network. I recently started having a really *** internet connection with Pings in the multi-hundred range. My setup is very...
View Article