conditions for Vlan IP to be up? PC 64xx
when does an IP of a Vlan go & stay UP? How does a switch decide when to take and keep it down?regards
View ArticleN1548p Reformat file system ?
Hi,Yesterday my N1458p only shows the boot menu and can't load the image, should I try reformat and restore file system option ? Any recovery guide you recommend ?Best Regards.
View ArticleStuck at pinging out of vlan on S3048
Hi. trying to get started on setting up a new network with a S3048 as the core switch. As a starter i've created a vlan - id 100. This has been assigned to port ge 1/1. Connected to this port i have...
View ArticleHow to enable Internet access for VLAN's.
Good day,I have 1 Dell Switch 6224 , with 2 VLAN 's configured , VLAN 400 and VLAN 500, but can not access the Internet .VLAN400 : 192.168.3.1/24VLAN500 : 192.168.2.1/24Default gateway IP :...
View Articledynamic VLAN assigemnet 802X PowerConnect 6248P version:3.3.12.1
Dynamic VLAN assigemnet 802X does not work with nps.on port 1/G17 i would like to use dynamic VLAN assigemnet.We have nps server.Radius client is doneAlso connection request policiesand network...
View ArticleN4032 two switch vrrp
Hi,There is a firewall and two n4032 switch connected to unmanaged flat switch. the vlan 5 used for two switch vrrp. the switch 1 is taking as master , but switch 2 is always showing initialized...
View Articleif a port-channel is in a Vlan do I need to manually-specifically put its...
from standard Vlan configuration point of view.?regards
View ArticleDELL PowerConnect 5548 factory reset using Telnet
If someone has the time could they please step me through the process of getting into the CLI to do a factory reset of a PowerConnect 5548? Never used Telnet, but I just enabled the feature in Windows...
View ArticleM1000e Port-channel problems
I've got an m1000e with (2) M I/O aggregator cards (slot A1 & B1) cabled via the 40g ports to (2) S6000 switches set up in VLT mode. I am using the default port channel (128) and ports 33-40 on...
View Articleto make management interface out of reach - 62xx
dear everybody,how to configure and access management interface if Vlan which is exposed, connected to the rest of net outside the stack (where from one would be hoping to access that management int)...
View ArticleDell Force10 S4810 access port question
Hi all,I need to pxe boot servers from a pxe/dhcp server and all of them are connected to S4810. Previously on powerconnect switches I had make the ports access port to specific vlan in order make pxe...
View ArticleBuy Registered IELTS,TOEFL,Certificates,Passports,Drivers License,ID...
Buy Registered IELTS,TOEFL,Certificates,Passports,Drivers License,ID Cards,Visas,We offer our exclusive clients the ability to gain IELTS,TOEFL,ESOL AUTODESK certificates without taking the exams. The...
View ArticleHow to config Dell 6224P LAN Switch to create a VLAN
Hi, I need to create a VLAN on one of the port then connect another switch from that port to extend the VLAN to one computer / on AP <this AP will DHCP the VLAN IPs to connected wifi...
View ArticleACLs dynamically ?
hi all,I would like to ask is it possible - just a thought, I've not look into it yet - to have 62xx report somewhere, or something to read switch's logs and then based on some scoring rules, some...
View Articlethird party twinax cables with N4064F
I'm looking at picking up a coupe of N4064F switches for use as dedicated iscsi switches. They will be connected to R620/630 servers mostly and compellent/equallogic storage.Does anyone have experience...
View ArticleN Series and 802.1X MDA
Hello,Does anyone know whether Dell N Series support MDA function for 802.1X authentication ?I would need to authenticate PCs connected to the switch through IP phone. Obviously, the IP phone will have...
View ArticleClik here to view.
x1052p and vmware VLAN (VST Mode) - 1 Port, 2x VLAN
Hello Community,I try to setup a esxi 6.0 with 2 VLANS (1-2) on one port of a x1052p and don't get it to work.This is my setting in the esxi vswitch They are conected to port 27 - I had to set it up as...
View ArticleSpecifying max-age and forward-time
Hello,I'm wondering when, if ever, we should specify the max-age and forward-time values when using RSTP on an N2000 and/or S4048 switch? Regards.
View ArticleAerohive, DHCP, 3048P, firmware 6.3.0.18
I noticed in our DHCP server logs lots of swiftly repeating entries about "no free leases" on our management vlans. All of our in-band management vlans are statically configured with their IP address....
View ArticleDell Enterprise Hardware & Software Updates, August 22 - 26
Popular DownloadsDell Server E-Support Tool (DSET) 3.7Dell Support Live Image (SLI) 2.2OpenManage Server Administrator (OMSA) 8.3OpenManage Essentials (OME) 2.2Servers & StorageArtesyn 2000W PSU...
View Article