N3024 SFP Disconnecting
We are currently dealing with an issue between two Dell N3000 series. We have a mix of N3024 and N3048 units in our office.The issue:We have two buildings connected via 10GbE SFP.In building A the ram...
View Article6248 Switch Intra VLAN and Internet Routing Issues
Hello, I'm new in networking and have been tasked with setting up our network with VLANS. We have two Powerconect 6248 switches configured in a stack. We created two VLANS (10, 168) and assigned ip...
View ArticleAccessing the PC2824 switch without having to change ports or VLANs
Hi There,I have a PowerConnect 2824 switch and I would like to access its management. Knowing that there's no way to change VLAN1 or its management to another VLAN, how can I access it without having...
View Article1 or 2 stacking cables for 2 x N3024 Switches?
Hi All,We've have acquired 2 x Dell N3024 switches for our business. We currently have one stacking cable to interconnect the two switches. This seems to work e.g. shows up switch 2 in the OpenManage...
View Article6248 Switch Intra VLAN and Internet Routing Issues
Hello,I'm new in networking and have been tasked with setting up our network with VLANS. We have two Powerconect 6248 switches configured in a stack. We created two VLANS (10, 168) and assigned ip...
View Articlessh settings for n series?
using openssh, what settings are needed to talk to an n series switch? $ ssh -VOpenSSH_7.2p2 Ubuntu-4ubuntu1, OpenSSL 1.0.2g-fips 1 Mar 2016$ ssh storageswitchUnable to negotiate with...
View ArticleN-series, enabling jumbo frames from web ui
switch is an N4032. how do you change the mtu on a port? tried menu-on-left/switching/ports/port configuration and it shows "maximum frame size" as 1518, but thats not a changeable value. anywhere...
View ArticleUnable to get SSH to work on Dell 6248p
I am in search of help concerning needed entires to get ssh to work on a Dell Powerconnect 6248p. I have read through many postings for what entries get ssh to work, I have entered all of the entries,...
View ArticleReceived ARP Request on interface Vl100 with bad target IP address - Meru...
We've just configured a 2048P Dell Switch in our infrastructure.We were having some problems with our switch cores, so we decided to add a extra switch to divide the network load.We've configured the...
View ArticleAuto-Assign Port VLAN based on Connected Device (e.g. VOIP phone)
Hi allI have some N3024P switches that need to be set up. There is a requirement to automatically place VOIP phones that are connected to the switch into the voice VLAN automatically. Is this possible...
View ArticleN2048 Level 3 - routing only some VLANs?
Let's imagine this scenario - simplified from our desired set-upVLAN 1 - server vlan 192.168.1.0/24 VLAN 2 - client vlan 192.168.2.0/24VLAN 50 - guest wifi vlan 192.168.50.0/24 We want to route freely...
View ArticleHardware Diagnostics
Hello everyone :)I'm trying to run hardware test on DELL switch n2048 by CLI and WEB, but i can't find option like this.Search in google without result. Have the last firmware. Have a problem with this...
View ArticleN Series RADIUS key requirements
Does anyone know the N-Series (specifically the N2048) requirements/restrictions for the RADIUS shared key?I couldn't get it to work with the same shared key I used in previous generation switches...
View Articletwo N4032 switch trunk and vrrp
Hello,I am trying to setup the trunk port between two N4032 switch. the purpose is to implement the vrrp with these two switches. may I know the trunk port configuration and best practice for vrrp.Thanks.
View ArticleHigh availability
Dears,please how to make high availability on San Switches located between the storage and serversif i have two switches N4000 Series what is the possible ways for high availability ??
View ArticleDell 7048 vlan
Hi,I have a stack of 7048 switches. Currently every thing is on Vlan 1 and I'm trying to separate the things into couple vlans. So, I created vlan 10 and give it an ip address. I also gave Vlan 1 an...
View ArticleVlan set up on PowerConnect 7048
Hey,This is my first Dell switch set up and it's not going so well :). I'm used to configure Cisco switches which shouldn't be a big difference as I think ?Any way here is what I'm trying to do:Our...
View ArticleSwitch P2048 and block port?
Hi all,I've 3 swtichs on stack. And I have one device, when I connected on any port, device do not communication. Led not flashes.Device is OK, when I connect on my NB, communication is OK.Thank you...
View ArticleSwitch N2048
Hi all,I have three switches in stack. And I have one device, when I connect to any port do not communication.Led not flashing.Device is OK, I tested on my NB.Thank for all reply, and I'm sorry, my...
View ArticlePowerConnect 6248P
Hello, New to the world of networking and was looking for some assistance regarding 2 Dell Powerconnect 6248P switch that I recently purchased. They are currently stacked with a 10GE CX4 stacking...
View Article