interface out of band cannot access
Hi,Has anyone else had problems where the N4064F switch management interface stops working.please advice me Dell Networking N4064F,4 ios 6.2.7.2
View Articlex1052 wont route to router
I installed a Dell switch and can access the internet and everything seems fine but I cannot access anything on the routers network. My routers main network is 192.168.1.x and the router is at...
View ArticleLACP
Hi, If i configure LACP on L3 switch (gig0/1 and gig0/2), and if these ports are connected to diffrent access switches (SW1 and SW2) ,Does it have any impact ? gig0/1(LACP) ----- gig0/1...
View ArticleReconnect port-channel to VLT
I'm having an issue very similar to this issue listed hereI have a dozen working port channels with the exact same configuration as the one I've recreated, but my new LACP / port-channels do not see...
View ArticleDell Mobile Computing Cart PS2 Managed w/PowerConnect 3548 switch
We currently have purchased several Dell Mobile managed carts that come with a PowerConnect 3548 switch. The premise behind it is to allow us to remotely manage multiple client devices that are in...
View ArticleGVRP between 2 Powerconnect Switches
I'm trying to set up GVRP between a Dell Powerconnect 3524P and a Dell Powerconnect 3548P. My eventual goal is to do most of the VLAN configurations on the 3524P and have them propagate all throughout...
View Article7048P Inter-Vlan routing
Hi I have three PowerConnect 7048p layer 3 switches that I recently set up VLANs on. The VLANS are 1,30,40,50,60,70, and 80 respectively. The three switches are connected over fiber and the ports...
View ArticleI can't remove VLAN settings on a particular port
I'm trying to change port settings via the CLI on a 5548P. I have this:!interface gigabitethernet1/0/47 channel-group 1 mode on no switchport switchport general allowed vlan add 200 taggedswitchport...
View ArticleDell N1548 - FAILURE event : fan
Hello,On two new N1548, I have these errors :<187> Oct 12 23:44:46 SWMAQ01-1 BOXSERV[boxs Req]: boxs.c(1171) 16421 %% Unit 1 fan 2 FAILURE event (4) occurred.<187> Oct 13 02:06:17 SWMAQ01-1...
View ArticleMonitorar Switches PowerConnect N3024 em Stack com SNMP
Olá pessoal,Estou enfrentando problemas para monitorar dois switches N3024 que estão em stack. Ao ativar o SNMP, o mesmo não responde à comunidade public e privada criadas dentro do gerenciamento do...
View ArticleIs there any way to disable(shutdown) a vlan interface on N series switch?
Hi All,In my past experience, I could use shutdown / no shutdown command to make vlan interface down / up under vlan interface id mode.Is there any similar command or workaround to achieve this...
View ArticleDell N4032F Po1 Learning to forwarding
Hi,I got 2 switch N4032F stacked and my Po1 have some problem.each seconde i got in log this :Po1 is transitioned from the Learning state to the Forwarding state in instance 0Po1 is transitioned from...
View ArticleSwitches (Force10 S3124) won't talk to PCs
I have a network that includes 2 switches connected to each other. One goes to the firewall and the other is connected to the 2 PCs.The switches can ping each other back and forth but the workstations...
View ArticlePorts acting weird on a 5548P switch
I cleaned up a network closet that had a Dell PowerConnect 5548 and a 5524P and replaced both with a single PowerConnect 5548P. There are only about 25 active network devices that run back to this...
View ArticleVOIP Handset Connection Issues - TCP Traffic Dropping N3048 stack
We are using a stack of three N3048p switches. Out VOIP server is plugged into the stack and all VOIP handset traffic flows through these switches to get to the server.After a software upgrade on our...
View ArticleDell PowerConnect 5324 EOL and EOS
Hi there ! We have some Dell PowerConnect 5324 switches at our colocations. As part of an inventory and technology planning for our company, I would like to know the End of Life and End of Support...
View ArticleDell PowerConnect 2824
I have a Dell PowerConnect 2824 24-port 10/100/1000 Gigabit Switch Switch for my household. At seemingly random times, the network freezes and I get no internet access. If I bypass the switch, I can...
View ArticleDell X1052 routing
Working with a Dell X1052P Switch and trying to get inter vlan netowrking working with the external connection for all vlans on vlan 1.Here's my scenerioip routing enabled on switchcreated Vlans...
View ArticleN1548 as a DHCPv6 relay
Hello everybody,Was anybody able to set N1548 to work as a DHCPv6 relay? DHCPv4 works fine for me but it looks like DHCPv6 requests do not propagate through the switch. Here is my partial config of the...
View ArticleReplacing master unit from a stack
Hello,I own 2 N4032 units configured as stack.I'm about to replace the master unit with a new one.I already restored all configuration to the new switch same as the one I'm going to replace.I would...
View Article