8024F can not create LACP connection
show interfaces status | include 0/18Te1/0/18 ybobdrrtr01 sfp1 Full 10000 Off Down InactiveTe2/0/18 ybobdrrtr01 sfp2 Full 10000 Off Up Activeshow interfaces port-channel 1Channel Ports Ch-Type Hash...
View ArticleX-Series DHCP Server lease limits
I can't find anywhere in the documentation the maximum number of addresses that the built-in DHCP server can lease. I know on some Dell switches it's very small (like only 256 address on the N-series)....
View ArticlePotential memory issue ?
Good morning,I am seeing the following issue in the logs of a stacked pair of N4064p switches running firmware 6.1.1.7broad_hpc_drv.c(4362) 465509 %% _soc_xgs3_mem_dma: FP_TCAM.ipipe0 failed(NAK)I...
View ArticleX1018 - Can not ping or route with VLAN 2
Hi everyone,i have some issues with the configuration of the X1018 for routing between two new VLAN's. So far i have set up 2 VLAN's in different subnets 172.x.x.x and 192.x.x.x. I activated the ip...
View ArticleDell PowerConnect 8132
Hi! While trying to reset to factory defaults I did "erase flash all" and hosed the switch! Any way to recover? The indicator light on the front is red and the console does not work!
View ArticleRouting Between VLAN's not fully working - N3024
I'm new to configuring Dell switches and I'm having an issue with routed VLANs.There are several VLANs on this switch, but I'll isolate the problem to 2 of them for simplicty.VLAN 300 -...
View ArticleN2000 & N3000 serie SSH stops working after some time
Hi team,After upgraded to the latest firmware 6.3.1.8. The SSH still stop working after some time (2 weeks or 4 weeks). So please help to update new hot fix to solve this issue.Soknaren
View ArticlePowerConnect 2848 - Multiple VLAN on 1 port not working
Hello everyone.I have a Dell PowerConnect 2848. My Router is a Netgear SRX5308. In the router, I have created multiple VLANs (VLAN ID 10 and 20) and want to pass that over to the ESXi server. If I...
View ArticleMicrosoft NLB on N4000 switches
Hi, I think I know the answer to this, but is there a work around to use NLB in multicast mode on N4000 switches?We have multicast setup at one site using S6000 switches and had hoped to replicate at a...
View ArticleDell PowerConnect 5424 - %ARP-E-ARPTBL: ARP Table Overflow
The switch is getting this message " %ARP-E-ARPTBL: ARP Table Overflow" recorded in the logs every 30 seconds or so for the last day or so. Clearing the arp-cache gets rid of the message for a few...
View ArticleHow to configure a VLAN to accomodate 1000 IPv4 addresses?
I need to configure a VLAN to accomodate 1000 IPv4 addresses on PowerConnect 6224. I created VLAN 20 and went to Routing --> IP --> Interface Configuration and selected the VLAN20.Following...
View ArticleDell Switch How to Kill A Process
Hello, I was wondering how to “kill” process running on a Dell Force 10 s 4810 Switch. As shown below is my problem;Found that sshd on dell switch is using high cpu util.FTOS#show processes cpu...
View ArticleStacked N3024 OOB IP Conflict
Okay, I'm not getting this2 x 3024 stacked, OOB IP address configured as 192.168.0.11 (MGMT LAN)I was scanning my network to do a cleanup of ip's in dns & dhcp when I noticed a strange ip,...
View ArticleM8024-K blade switch - won't factory reset
I have two Dell M8024-k switches and they are driving me absolutely crazy. I recently placed them both in a stack for testing purposes (they're not in production). Now I want to just reset them to...
View ArticleDell OS on VMWARE
Hello,After created on Virtualbox the VM based on FTOS, I have tried to export to Vmware platform and doesn't works. Also I have modified the ovf file that is the description file but doesn't...
View ArticleInterVLan Routing
I currently have 7 layer 3 switches. I have 2-n4032 switches for my backbone. I have 2-Dell n3024p switches in one closet. A HP Procurve in the server room and 2-Dell n3024 switches in the server room....
View ArticleOpenManage Switch Administrator with HTTPS SHA 256 CSR on N4032F, possible?
Hi,we have a Dell Networking N4032F Switch with Dell OpenManage Switch Administrator Version 6.0.0.8.Since SHA-1 is not supported by browsers in 2017, I would like to change the certificate to SHA-256...
View ArticlePower Up A Stack
I've just received 5 pc6248s and I want to build them into a stack.1. The switches are all used so do I have to factory reset them before building them into a stack?2. From what I read in the Dell...
View ArticlePreferred QoS configuration on Dell 2048P edge switches
Hi All,I wanted to establish what is the preferred QoS configuration for a 2048P switch that connects to Cisco IP PhonesThe Cisco phones mark their own voice signaling and voice bearer packets with...
View ArticleDell switch N3048 ACL problem
Hello,We are trying to setup two N3048 stacked switches and we have trouble with ACLs. We need to define ACLs on every VLAN and thought that rules are applied just in case that packet is leaving vlan...
View Article