Quantcast
Channel: PowerConnect Forum - Recent Threads
Browsing all 908 articles
Browse latest View live

Trouble with N3024 switch and Forcepower 10 switch

I have a system I am trying to configure. I have a dell N3024 external switch and a Forcepower 10 switch connecting to a server. There are 2 separate systems. System 1 works just fine but the same...

View Article


PowerConnect M8024-k switches losing clock settings upon reboot

I have 2 PowerConnect M8024-k blade switches in a stack configuration (although this issue was also occurring without the stack). I am setting the clock manually with the clock set commands, but every...

View Article


DELL N3024F - ARP[ipMapForwarding]

Hi ,I am having issues with ARP broadcast from our network devices which has Failover virtual IP configured for 2 x physical NIC connection.Our setup is 2 x DELL N3024F switch connect to 02 x DELL...

View Article

Accessing boot menu on a M8024 from the CMC cli

Is there a way to access the boot menu on a M8024 though the CMC console redirect? Bought a used switch and I am unable to log in and need to reset the password and all the settings. If not will any...

View Article

Need help with commands to clear a switch port config N2024 Stacked

The existing config is:interface Gi1/0/20speed 1000description "WifiLocation2"switchport general allowed vlan add 154switchport general allowed vlan add 153 taggedswitchport general allowed vlan remove...

View Article


802.1X with MAB on Phone+PC port

Hi,I am considering enabling 802.1X on N2000 switch on a port with Phone & PC connected and need some clarification on the subject of behavior of this setup.I want to treat the Phone as 802.1X...

View Article

Dell N4000 decrease convergence time MLAG/VRRP

I am having issues with the time convergence in this solution. Basically, I have two N4064F in MLAG and running VRRP. Everything works fine, but the time is killing me.Sometimes it takes 5-12 seconds...

View Article

Delete post

Delete post

View Article


load balance Radius Authentication

HI Guys,we have a bunch of N1548p in our office and our new project is to set RAdius authentication in those switch, my question is how can i configure the switch in case my frist radius server fail it...

View Article


Help setting up Voice VLAN on PowerConnect 3548p

Hi,I currently have four 3548p switches and a Mitel 3300 telephone system. At present we have a simple flat network but as things are expanding I would like to separate the telephone traffic using a...

View Article

Jumbo Packet error on N3048P Switch Stack

I do not have Jumbo Frames enabled on any device on my network but I am continuously getting Jumbo Frames (which show up as errors on one of my switch stacks) and I have no idea where they are coming...

View Article

VOIP phones unable to obtain IP. N4032F core with 3 x stacked N2048P edge...

My DHCP server is configured with all the scopes and option 156 (configServers=1.1.100.10, ftpservers=1.1.100.10, country=7, language=4, layer2tagging=1, vlanid=100) which is required for our Shoretel...

View Article

Powerconnect 8024K blade switch to vsphere vswitch ?

Good day to AllI have a stacked pair of PE 8024 blade switches, a 10gb interface from each (eg. Te1/0/1 and Te2/0/1) presents to a pair of NICs on the physical side of a vSwitch (I have 4 hosts...

View Article


powerconnect 2824 VLAN

Hello everybody,It is the first time i have to configure a Dell switch and I have trouble setting up my VLANs.I need 3 VLAN:VLAN1 : internet connected with a router for the internet accessVLAN2 :...

View Article

Dell PowerConnect 8024F CPU OIDs

Hi,I've read a post on this site which suggested these OIDs: .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.3...

View Article


2 N3024 switches VRRP Config questions

First question is that on both of my switches, there is one vrrp address that both switches take master state on, I've tried reloading both switches and I'm not sure why, all of the other vrrps will...

View Article

HTTPS on N-series (blank certificate)

Hi,On N3000 with 6.3.1.8 OS I tried to set up HTTPS web management access, with following commands:(config)# crypto certificate 1 generate(config-crypto)# key-generate             <---- just default...

View Article


Power Connect 62xx - sflow Sampler limits

Is there a firmware version that has addressed the 'Maximum Samplers Limit exceeded' error when 32 are reached?  I have stacked 48 port switches and would like to have all ports set.

View Article

Dell Switch N2048 Inter Vlan Routing

Dear all ,I  am facing a issues in N2048  switch , we have created a multiple vlan in switch , but we are unable to communicate from vlan to other vlan .Running configuration is as attached .please...

View Article

General Mode Vs Trunk Mode

Hi All,I apprecaite General Mode is more flexible when interconnecting two Dell switches.However, is it preferable to use trunk mode when interconnecting a powerconnect to a different vendor switch or...

View Article
Browsing all 908 articles
Browse latest View live


Latest Images