How to disable TFTP from Dell switch
I have a 3048 and a couple 4810s and I want to disable the TFTP function. Client and Server. Is there a way to do this via CLI configs? Note: I do not wish to block TFTP traffic I want to stop the...
View ArticleClik here to view.
Problem between vlans
Hi,I'm working with a hybrid cloud and between the two sites I have an Ethernet Line, so we can have the same IP class.At my site, there is a Router that receives packets from the cloud with VLAN 10....
View ArticleDell N4064f DCB setup for SMB
HelloWe are having a big problem enabling Datacenter Bridging for SMB traffic for Storage Spaces Direct.This is the commands we runconf tclassofservice traffic-class-group 0 1classofservice...
View ArticleX1026 set up
I'm having a fiddle with our system and putting in an X1026 as a test before we use more.I've gotten it into managed mode and logged on but working through the set up wizard the final option to finnish...
View Article"Unable to submit Service Tag for a Dell PowerConnect 5548"
Attempting to lookup product support (pull warranty data/update firmware) for a Dell PowerConnect 5548 w/ an ST of HSZ40Z1 and am receiving an error that states "There is no match for that Service Tag...
View ArticleClik here to view.
Simulating Dell FTOS with GNS3 on MAC device
Hello,I am trying to simulate Dell on GNS3 and after all I have a issue with VNC. Did you check this issue before?Best regards,
View Article[N20XX] RADIUS Server usage login does not work
Hello,we are already using dot1x and want to add management access by SSH to the switches based on RADIUS authentication. As you can see in the configuration below, I want to use a different RADIUS...
View ArticleN2000 Routing Options
I understand the N2000 series has limited L3 routing options. I wanted to explore if any of those options might solve my problem. I simply want to divert all traffic going to a specific internal...
View ArticleN4032F failover link
HiIs it possible to have 2 ports on a switch that port 1 is the primary path to the gateway and port 2 is to a secondary path. I need them to auto failoverAny Help would be greatthks
View ArticleClik here to view.
N2048 Problem with TACACS
Hi,Please help me. My Dell N2048p Switch don't send query to TACACS server.I set up TACACS Server with TACACS.net on Windows Server 2008 and config Dell N2048 to use TACACS for SSH Authentication. But...
View ArticlePowerConnect 6248P triple stack / No link lights on the second or third switches
The switches turn on, they seem to stack correctly. Master #1, #2, #3.I can log in and they all show up. All the firmware is the same.I had to update a few of them from an older version and use telnet...
View ArticleDell N3048P VLAN ACL
Greetings everyone,I'm currently demoing the N3048P switch as a possible replacement for my edge access switches for the school district I work in. Currently I am running Avaya ERS 5600's which are...
View ArticleDell Networking N3024 and Dell Networking N2024P Trunking using GUI.
I am new here for using dell. I have Mikrotik CCR1036 Connected to Internet, I have a Dell Networking 3024, Then I have 5 Dell Networking N2024P deploying In each floors. I also have 20 Dell Networking...
View ArticleFirst time setting up VLANs across interconnected N5000 & N3000 switches,...
At my company, we have a stack of PowerConnect N3000 switches for our core (stacked with mini-sas cables in the back) and then they connect to switches in various closets throughout the building via...
View ArticleN2000 Error message ? broad_hpc_drv.c(4429) 28494 CACHE_RESTORE:...
Hi, had this error on a N2000 we have it connected to a few physical servers an M1000e(using M6220s with HV) and a couple of Equilogics. (so can't easily reload it)Appeared out of the blue and has...
View ArticleMultiple Class C networks and matching VLANS for routing
I have a customer that has (2) S4048T-ON Dell switches and several smaller layer 2 switches connected to it . The customer wants to create the following scenario using his gear. I haven't done it...
View ArticleIssues with LAG across N4032 Switch Stack
I have had issues with stacking 2 N4032's. First issue was the slave switch would disconnect and stop responding after 8 hours or so. I applied firmware version 6.3.1.13 which appears to have solved...
View ArticleClik here to view.
VoIP QoS
Hi,I have just installed a DELL N4032 into our environment to act as a L3 switch to route VoIP traffic from a voice VLAN to a data VLAN where the PBX is located. The VoIP and data traffic are directly...
View ArticleSimple home network with Power Connect 3348
We have about 8 - 9+ computers in our household (shop pc, mine and my brothers bedroom pc and consoles, kitchen, my 2 game development pcs, music production pc, 3D animation workstations and my dads...
View Articleon logging server logs not showing up with hostname for Dell switches
Hi,I hope you can assit with the followingwith our dell switches logs are not showing up with hostname on our logging server.Do we have simillar command like origin id (witch cisco) switches where...
View Article