RX Discards
I have a Dell N1524 with Code Version 6.2.6.6. I'm monitoring the Interfaces in a Software, and it is showing me RX Errors and discards in one port. In this port I have an Access Point Ruckus, but the...
View ArticlePowerconnect 8024F QinQ Configuration
Hi All, Please bare with me as this is my first post on Dell forum :)I am currently running a QinQ setup for a client as they require a L2 service from us.For all intents and purposes lets say the...
View ArticlePowerConnect 5524 Fault Tolerant Setup
We have a Hyper-V 2012 R2 Cluster with several host nodes, which are all Dell PowerEdge Servers, connected to two PowerConnect 5524 switches, in a Master/Master-Backup setup, which are in turn...
View ArticleAccidently Removed Static IP of PowerConnect 5448
I am trying to learn about network switches and need to correct something I messed up working with a Dell PowerConnect 5448. I was trying to change the static IP address of this switch and instead of...
View ArticlePlease Help!! Connecting various Dell switches..
Hi,I'm new to the group and networking as well..I've acquired the following equipment.1 Dell 8032 with 1 QSFP-R Stacking Module 5KFVW1 Dell 7048R with 2 J3PC9 10 Gbe SFP+Ethernet Module1 Mellanox...
View ArticleSSH on a PowerConnect 7024
Is there a way to disable SSH v1 on a PowerConenct 7024, while leaving SSH v2 enabled?
View ArticleNSeries Console Password
I am having trouble setting a password so that when I console in through the serial cable, I am prompted with a passwordI do not mean the ENABLE password which I can get working OK.
View ArticleUNKN[112661328]: macal_api.c(844) 385166 List does not exist.
why I am getting this alert message from all my Dell PC6248 switches.2/21/2017 9:09:03 AM172.21.110.4Informational172.21.110.4-1 UNKN[112661328]: macal_api.c(844) 385166 List does not exist.2/21/2017...
View ArticleDell X1052 has no community ports?
We want to configure a Dell X1052 switch with private VLANs. The GUI has Port Mode options for Promiscuous and Isolated ports, but not community ports. Is this a feature that is lacking in the X1052...
View ArticleCannot Console to S4048-on
I am unable to get serial console connection to this model switch. I have tried 2 seperate switches with 2 seperate cables. Using 115200/8/none/1/ no flowAlso tried 115200/8/none/1/ no flowThis has...
View Articlestrange problem with traffic policing - PowerConnect 5548
Hi,We're experiencing a somewhat bizarre issue. I'll try to lay it out as clearly as possible.We have a 8-member PowerConnect 5548 stack - 4 PoE units and 4 non-PoE units. This stack is uplinked to two...
View ArticleConnect PowerConnect 6248 and Force10 S4810
Hi,I have two PowerConnect 6248 Switches connected with Stacking. Now I want to connect a Force48 S4810 Switch on the same network.Both 6248 have an SFP + module.What is the best way to connect?Thanks.
View ArticleNew N1548p u-boot Menu First start
Hi all,I receive today a new switch N1548P and during the first start I have the following error :UBIFS: mounted read-onlyUBIFS: file system size: 107802624 bytes (105276 KiB, 102 MiB, 849 LEBs)UBIFS:...
View Articlex1026 trunked with Cisco 3750
This is embarrassing. I have multiple Cisco switches at work and home. I have worked with Dell PowerConnects for years. However, this x1026 is kicking my piehole. I need to setup a quad port trunk...
View ArticleN3024P Combo port SFP connected to SFP port on N2024P comes up in D-DOWN...
We have 5 N-series switches across various data rooms at one of our sites. In the main server room we have an N3024P (two switches come into the two SFP ports, Te1/0/1 and Te1/0/2), and an N2024P (one...
View ArticleDell PowerConnect M6220 Blade Switch - Remove Switch From Stack
Hello, Everyone.We have 3 Dell PowerEdge M1000e Chassis that each have four M6220 switches in them (A1, A2, B1, & B2). Each set of switches is stacked amongst the 3 chassis creating a stacking loop...
View ArticleTrunk between 6248 and 8132
Hi,I have a trunk port between 6248 and 8132 with general mode. Please see the interface configuration below:6248:interface ethernet 1/xg1description 'xxxxx'switchport mode generalswitchport general...
View ArticleConnecting Cisco 7937 conference station to Dell 5524P
I am trying to connect a Cisco 7937 Conference phone to a Dell 5524P. It gets power but I cannot get the phone to register. When I plug it into a cisco Switch on the same network, it works fine. I...
View ArticleOpen Manage Network Management / stacked switches
Hi,Two questions.1. I have a stack with 2*N3048. I can see the details of the master switch (service tag, serial ...), but not for the other switch. Where can I find them ?2. How configure monitor to...
View Articleinternet speed powerconnect 2724
We recently upgraded our internet service through Comcast. When my computer is connected directly to the modem, and nothing else is connected to the modem, we get full-speed upload and download as...
View Article