M8428-K ospfv3 hello dropped
hello,ospfv3 hello packets sent out from vmware vm connected to a M8428-K switch are dropped by m8428-k - 2 vm on the same vmware host works correctly, - if I move one of the vm on a different host,...
View ArticleInherited PowerConnect 3548 prompts for password at boot.
Hi All,I have inherited a powerconnect 3548, where I work and I'm unable to get into the settings.I've entered the boot menu on startup by pressing escape, then no 3 for the password recovery option,...
View ArticleHow to block a single IP (192.168.0.1/22) on every port of switch but the...
In an educational enviroment, students add ip address 192.168.0.1 in their phone, intentionally, or by turning on hotspot, this then interferes with in-house dhcp server and gateway. We have Dell 6224-...
View ArticleLog Message: Port is transitioned from the Learning state to the Forwarding...
Hello Support,We have a N1548 with firmware version 6.3.0.18 and in the log file we have hundreds of messages like this:Notice01-06-2023 17:16TRAPMGRGi3/0/11 is transitioned from the Learning state to...
View ArticleACL GUESTWIFI on PowerConnect 6224
HiIm creating a GUESTWIFI VLAN (VLAN40 - 10.18.40.0/24) and I only want it to reach DHCP servers (VLAN60 10.18.60.15 & 10.18.60.16) and to access the Internet via my WatchGuard(10.18.254.1) on...
View ArticlePowerConnect 6224 VLAN for WAN connection of VM router
I've created a VLAN containing 3 ports, 1 for each VM host connection and 1 for the modem. The switch sees the MAC addresses in the VLAN for the VM and the modem. However, I cannot get the network...
View ArticlePowerConnect 5548P: Radius API returned error
Hi,Since few months, I working to deploy the security protocol 802.1x on wired network of enterprise. It's work well, but since two weeks one of our switches is not more able to authenticate users.It's...
View ArticleSpanning Tree Topology Change Received:
Hello Support,We have a N3024F switch with firmware 6.2.0.5.In the log files we have dozens of messages like this, I am attaching the complete log file :Spanning Tree Topology Change Received: MSTID: 0...
View ArticleDell Enterprise Hardware & Software Updates, June 26-30
Popular DownloadsOpenManage Server Administrator (OMSA) 8.5OpenManage Essentials (OME) 2.2Support Live Image (SLI) 2.2SupportAssist Enterprise 1.0Servers & StorageBroadcom Linux BACS GUI and CLI...
View ArticleFeature request: Implement a timeout for BPDU protection
Hi,don't know it is the right place here but here is a request: The BPDU-Protection feature comes handy to avoid network loops, especially if users try to help themselves and mess something up....
View ArticleN2000 CPLD update
I have a large number of 2024p/2048p switches that we deployed last summer with 6.3.0.15,16 or 18 and CPLD 13. I was looking over the notes for the upgrade to 6.3.2.7 and trying to figure out the...
View ArticleForce10 s4810-ON FTOS firmware
Hello!Is it possible to use the FTOS operating system on this switch (s4810-ON)?
View ArticlePowerEdge VRTX R1-2401 Configuration
So I am trying to setup the installed 2401 switch in the chassis and I am running into my first issue right out of the gate. Error message: Duplicated IP interface on the same subnet.Situation: I have...
View ArticleEnabling BPDUGuard on Portfast ports for a N series switch
I'm trying to enable BPDUGuard on ports that are currently setup as Portfast on an N2048P switch. How might I be able to enable this?Regards.
View ArticleN Series Switch Mac-Address Port-Security
Hello all,We use N30's and N20's in our network, and have started using port-security to lock down machines to ports etc using the following port settings: !interface Gi1/0/1description "---"switchport...
View ArticlePowerconnect 6248 Route Preference
I have about 8 or 9 static routes configured all with preference 1 in my powerconnect 6248. I want to change all of them at once to like 10 or 20 so that I can at least have some wiggle room to add...
View ArticleUnable to configure interface on Dell Powerconnect M6348
I have a task to add more Vlans to an already defined Vlan list on multiple Dell switches.When I go to configure mode, and under the interface, there are no switchport related commands available for me...
View ArticleNo connection to stack (N1548 2x - N1548P)
Hi,I created a stack between 3 switches. I created 2 vlan's (22, 24).These are only used on port 43 - 48 of the N1548P, 3th member in stack.On the Default Vlan 1 i set the ip adress to...
View ArticleDell N2048P - NSA250 SonicWall and Cisco SG500X Core
At present the company I work has a Cisco SG500X Stacked core, we have replaced some switching with N2048P devices and now we are having trouble getting our SonicWall VLAN Tags across to the port.On...
View ArticleConnect PC 6248 to N3024 over AT&T ASE
We have a new AT&T ASE point to point (layer 2 metro ethernet) circuit with a 1GB port. At one location, we have a N3024 and a 6248 at the other end. The circuit is terminated with multi-mode fiber...
View Article